Phrozen Nylon Like – Green

Spec & Properties

• Volume: 500g per bottle
• XY Planar Resolution: 0.047 mm
• Z Resolution (Layer Height): 30-100um
• Phrozen Nylon-Like is customized for 405nm LCD printer. Cure time per layer: 10 sec on 50um layers
• Property: developed for low shrinkage and high precision printing. Meanwhile its low odor will not make your place smells.
• Way to Rinse: Clean with alcohol spray with air gun
• Suitable for: LCD 3D Printer
• Application: General modeling & prototyping

Operation

• Suggest to use our resin and printer indoor under ventilated situation.
• Avoid exposure to sunlight and indoor luminescence.
• Please preserve our resin in closed opaque bottle in avoid of exposure to air.
• Do not mix used and non-used resin together.
• Please keep the resin away from kids.
• Do not dump resin. Please cured resin and treat/recycle it as general plastics garbage.

Safety Rules

• Do not eat and swallow the resin. Go to hospital if necessary.
• Wear goggles in avoid of eye contact to resin. Wash your eyes by water and go to hospital if necessary.
• Resin might cause slight irritation to skin. Wear gloves when handling. Stop using it if allergy occurred.
• Resin is with slight odor. We strongly suggest you to use it under ventilated condition.
• Suggested safety equipment: gloves, mask, goggles, and lab coat.
• Keep resin in room temperature(15 - 35 OC) and dry condition.