• New

Phrozen Water Washable - Model Gray (1KG)

8000000005519
In stock
€49.55
Tax excluded

Phrozen Water washable Model Gray

  • Water washable: Unlike standard resin, Phrozen water washable resin can be cleaned with normal water, no IPA needed
  • Low viscosity: Phrozen water washable Resin is easy to print and post process due to its low viscosity
  • Low odor: More pleasant to use in an office or home environment
  • Fast printing: Phrozen water washable Resin is customized for 405nm LCD printer. Cure time per layer: 7 sec on Shuffle & 1.5 sec on Sonic (50µm)
  • Tough & non-brittle: Typical water washable resin is brittle, but not Phrozen’s water washable resins. Printed parts from Phrozen Water-Washable Resin have a good hard and toughness. It is perfect match for models, prototyping and much more

Features

  • Contents: 1KG
  • XY Planar Resolution: 47 micron
  • Z Resolution (Layer Height): 30-100um
  • Normal layer time: Shuffle: 7 sec @ 50 um, Sonic 1.5 sec @ 50 um
  • Property:  High hardness, toughness and resolution.
  • Way to Rinse:Clean with alcohol spray with air gun
  • Suitable for: LCD 3D Printer 405nm UV
  • Application: Tough & Non-Brittle
  • Colour: Gray
  • Viscosity: Low
  • Odor: Low

Specifications

  • Viscosity: 149 cps
  • Density: 1.05 g / cm3
  • Tg: 87C
  • Tensile Stress (Break): 21 MPa
  • Hardness: Shore 80D
  • Elongation: 14 %
  • I-Zod Impact: 1.52 KJ/m2

How to use

  • DO NOT rinse printed objects under the tap
  • Water washable UV resin is just as dangerous as normal UV resins
  • Please make sure these chemicals do not get into the environment
  • Always wear personal protection (gloves, glasses) when handling resin
  • Clean water washable printed objects in one or two stages
  • Use tubs/containers filled with water
  • Dry with air
  • DO NOT throw away the waste water without post processing
  • 1) Cure the resin contaminated waste water with an UV Lamp or Sunlight
  • 2) Filter the solid resin particles out of the waste water
  • 3) Dispose waste water
  • 4) The remaining filtered particles should be treated and recycled as plastic waste
  • Please preserve our resin in closed opaque bottle in avoid of exposure to air
  • Do not mix used and non-used resin together

Notes & Warnings

  • WARNING water washable UV resins are dangerous chemicals just like normal UV resins
  • DO NOT rinse printed objects under the tap
  • DO NOT throw away the rinse waste water without post processing
  • DO NOT let these chemicals get into our environment
  • Always wear personal protection (gloves, glasses) when handling resin
  • Use your resin 3D printer under well ventilated circumstances
  • Suggested safety equipment: gloves, mask, glasses, and lab coat
  • Do not expose UV resin to sunlight or indoor light containing UV
  • In case you consume UV resin, get medical advise
  • In case resin get’s in your eye, wash your eyes with water and get medical advise
  • Resin can cause skin irritation, always wear gloves when handling
  • Please keep UV resin away from kids
  • Keep resin at room temperature(15 – 35 OC) and dry condition.
No reviews
Product added to wishlist
Product added to compare.

This store uses cookies and other technologies so that we can enhance your experience on our website. By using our website accepts the use of cookies. You can get more information about cookies and their use on our website in the section Terms and Conditions, paragraph 4. pressing "Accept" accepts the cookie policy of this website: