Monocure 3D RESINAWAY - 5L.
Monocure 3D ResinAway - 5L.
Monocure 3D RESINAWAY® is a non-flammable, safe, highly advanced UV resin cleaning solution. It is chemically engineered to quickly & effectively remove any uncured UV photopolymer resin from printed parts without unwanted surface cracks, cloudiness or white residue. It is a perfect cleaner for build plates, vats, instruments & surfaces.
It is safer, quicker, more effective and longer lasting than Isopropyl Alcohol (IPA).
FOR BEST RESULTS: PRINT - RESINAWAY® - BLOW - POSTCURE – WASH
Use this cleaning agent as is, do not dilute with water. For best results, start with a "pre-wash" of RESINAWAYin a separate container to remove excess resin using a soft brush to assist. Then place the object into an ultrasonic cleaning bath. Keep printed objects submerged in RESINAWAYuntil the uncured resin has been removed. Once clear of resin, remove the object from bath, use compressed air to remove excess liquid, otherwise pat dry with a lint-free cloth. Then post-cure the part using a recommended LED 405nm light until the surface is tack free (approx. 5 mins at 30 watts). The final process is to rinse under running tap water. For cleaning vats, build plates, instruments & surfaces, rinse/soak/wipe with RESINAWAYthen wash with fresh water.