BRASSFILL - 1,75mm - 750gr
The material is still in beta, which means we’re still working on the formulation to get the best possible performance. Our current formulation is providing excellent results on 1.75mm direct drive printers, such as the Makerbot Replicator 2 and Prusa I3.
The filament is slightly softer then bronzeFill and copperFill, users need to be careful with applying pressure onto the filament. We’ve found that 3D printers using a bowden tube set-up and 2.85mm filament gives the least reliable results. Users need to take extra care of not over stressing the filament, with pressure and retraction settings.
Like copperFill and bronzeFill the brassFill filament can be post processed. A unique quality of brassFill is the lovely golden shine it shows when polished to perfection.
Diameter: 1.75 ± 0.05mm
Advised 3D printing temperature: 195 – 220ºC
Advised 3D printing speed: 40 – 100 mm/s
Advised heated bed (not strictly necessary): 50 – 60ºC
Compatibility: It is highly recommended to print this material with 0.6mm nozzle.