• On sale!
PrimaSelect PVA+ - 1.75mm - 500 g - Natural
PrimaSelect PVA+ - 1.75mm - 500 g - Natural
PrimaSelect PVA+ - 1.75mm - 500 g - Natural
PrimaSelect PVA+ - 1.75mm - 500 g - Natural
PrimaSelect PVA+ - 1.75mm - 500 g - Natural
PrimaSelect PVA+ - 1.75mm - 500 g - Natural
PrimaSelect PVA+ - 1.75mm - 500 g - Natural
PrimaSelect PVA+ - 1.75mm - 500 g - Natural
PrimaSelect PVA+ - 1.75mm - 500 g - Natural
PrimaSelect PVA+ - 1.75mm - 500 g - Natural

PrimaSelect PVA+ - 2.85mm - 500 g - Natural

8000000003621
Out-of-Stock
€49.50
Tax included

€40.91 Tax excluded

PrimaSelect PVA+ - 2.85mm - 500 g - Natural

PrimaSELECT  PVA+ (polyvinyl alcohol) is a water soluble material that´s most often used as a support material.

PVA prints translucent with a slightly yellow tint. It is most often used on 3D printers with dual extruders, with one extruder printing a primary material (such as ABS or PLA) and the other printing this easily-dissolved material to provide support for overhanging features.

Our new formula for PrimaSELECT  PVA+ is more stable to print with than regular PVA. This also means that it bonds much better than regular PVA to PLA, ABS and PETG.

PrimaSELECT  PVA+ is the perfect support material for PLA, ABS and PETG due to that it is soluble in water. With this material you can make very complexed prints, for example if you need a print that should be hollow. Print with dual extruders and then just put the finished print in water and watch the support material dissolve.

When printing with PrimaSELECT  PVA+ we recommend that you use a heated bed. Set your heat bed to ± 80-90˚C for best results.

PrimaSELECT  PVA+ sticks on BuildTak or glass plate coated with adhesive spray or glue stick.

PrimaSELECT  PVA+ is reeled on a transparent spool with 500 g of high quality filament. It´s packed in a sturdy box and packed with silica gel to avoid moister.

PrimaSELECT  PVA+ are available in diameter sizes of 1.75 mm and 2.85 mm.

Our state of the art factory is equipped with the latest in laser measuring technology to ensure that you will receive a spool of filament with a very tight diameter and roundness tolerance. This in turn makes for a filament that is compatible with most common printers on the market today.

 

Technical data:

Material              PVA+

Diameter             2.85mm

Tolerance           ± 0.05 mm

Heated build platform required      Recommended 80°C - 120°C

Print Temperature           180  - 205°C

Weight Filament              500 g

Spool Size           200 x 55 mm

Spool Hub Diameter        53 mm

No reviews
Product added to wishlist

This store uses cookies and other technologies so that we can enhance your experience on our website. By using our website accepts the use of cookies. You can get more information about cookies and their use on our website in the section Terms and Conditions, paragraph 4. pressing "Accept" accepts the cookie policy of this website: